From Hopper Gun to High Pressure and everything in between.  Choose the system that's right for you.

Click picture icon for more details

 

      

 SL-1000 Hopper Gun               SL-Cartridge Gun                              

 

             

 SL-1000 Pressure Pot                         Graco E-10 (heated)

 

 

                      

         Graco E-XP1                                 Graco E-XP 2

 

 

           Airless Spray Rig                                                 

                                                                             

                                                                               

EQUIPMENT & MATERIAL ROOM (E-10 & E-XP series)

  • Minimum 10ft wide X 10ft long X 8ft high fully insulated walls and ceiling.
  • Recommended to be located next to spray room with common wall to spray area.
  • Heated vents located on 3 corners at bottom of wall 2 ft from the floor.
  • Air intake on 1 corner at bottom of the wall 2 ft from the floor.
  • Heater must be capable of maintaining the room at 80F – 90F 24 hrs a day, 7 days a week.  No open flame heaters.  Radiant or infrared heater with adjustable thermostat works best.
  • A small A/C window unit may be necessary in parts of the country where shop temperatures reach 100F.

 

APPLICATION AREA - for truck bedliners only

  • One truck:  16ft wide x 16ft deep x 11ft high (minimum)
  • Two trucks: 24ft wide x 18ft deep x 11ft high (minimum)
  • Flourescent lighting
  • Tar paper on floor with duct tape
  • Polyethylene curtains capable of completely enclosing spray area (NFPA 701 compliant)
  • Ventilation fans must exhaust air 2-3 times per minute.  Forced makeup air will be required.  Heated air will be needed in colder climates.  Note:  To determine the CFM of exhaust fan, take total volume of the room and double that number.  3,000 cu ft room will require 6,000 cu ft fan.