Speedliner® 410
This very unique urethane coating gels and stacks instantly for thick, high-build applications, but takes about an hour to dry to the touch. It can be sprayed with either a pneumatic cartridge gun or low-pressure pressure equipment. Cure time can be accelerated with heat. Recommended for medium to dark colors only. No VOC.
Advantages
- Can be sprayed at very low pressures –less overspray
- Solid physical properties – protects well against abuse
- Cure time can be accelerated with heat – spray with inexpensive equipment, but still get rapid cure.
- Can stop spraying for up to 5 minutes and start again without changing static mixer
- No VOC
Disadvantages
- Poorer UV protection – limited to darker colors. An extra Top Coat may be necessary for some applications.
- Slow dry time (when heat is not used) - Must protect wet coating from cold and/or wet weather while it dries.
Applications
- Undercoating, waterproofing
Strength (tensile)
Hardness
UV
Application method(s)
VOC
Dry time
- Dry to touch in 60 minutes at 70 degrees F 80% cured at 24 hours at 70 degrees F
Packaging
- 5-gallon pails, 55-gallon drums, or 250-gallon totes
- Cartridges: Cases only (6 – 1.5 liter cartridge kits per case)
Standard colors
- Black, dark green, red, dark blue, charcoal gray, camo green, camo brown
Other colors available
- Ask you customer service agent for details