Graco E-XP1

 

E-XP1 Reference Guide

 

MATERIAL

 

ELECTRICAL REQUIREMENTS

  •  E-XP1 Max: 240 VAC, 69 amp, 1 phase 

 

COMPRESSOR

  • Minimum 7.5 HP (220 V, 1 phase, 35 amp) two stage with 80-gallon tank capable of 25 CFM @ 100 psi to be used exclusively for equipment only.  Automatic drain is highly recommended.
  • Minimum 10 HP with 120-gallon tank may be necessary if others in the shop will be using air tools simultaneously.

 

REFRIGERANT DRYER

  • The spray air needs to be less than 5% relative humidity as it leaves the gun.
  • A 3-in-1 refrigerant dryer for you compressor is mandatory.
  • Air membrane dryer is mandatory.