Graco E-XP 2
E-XP-2 Reference Guide.pdf
MATERIAL
ELECTRICAL REQUIREMENTS
- E-XP-2 (High Pressure) Max: 230 V, 3 phase, 60 amp
- E XP-2 (High Pressure) Max: 230 V, 1 phase, 100 amp
COMPRESSOR
- Minimum 7.5 HP (220 V, 1 phase, 35 amp) two stage with 80-gallon tank capable of 25 CFM @ 100 psi to be used exclusively for equipment only. Automatic drain is highly recommended.
- Minimum 10 HP with 120-gallon tank may be necessary if others in the shop will be using air tools simultaneously.
REFRIGERANT DRYER
- The spray air needs to be less than 5% relative humidity as it leaves the gun.
- A 3-in-1 refrigerant dryer for you compressor is mandatory.
- Air membrane dryer is mandatory.